THE SHORT ANSWER
Most investors who hesitate right now are worried about one of six things: not enough capital, higher rates, a flat market, potentially overpaying, a rehab that runs over, or getting stuck at the exit. Each fear has a practical fix. For the biggest one, capital, 100% loan-to-cost financing can cover both the purchase and the renovation on qualifying Texas deals, so you are not tying up your savings in a down payment.
Hesitation is normal. Staying stuck is optional.
Almost every week, our team talks with an investor who has found a solid deal, run the numbers, and still not made an offer. When we ask why, the answer usually comes down to fear. Sometimes it is about money. Other times, it is about the market, the rehab, or what happens if the house doesn’t sell.
Those concerns are reasonable. Real estate involves real money and real risk. Even so, fear without a plan tends to cost investors the deals that would have built their business.
This guide takes the six most common fears one at a time. For each, we explain what drives it, what the data actually shows, and how to reduce the risk. Then we walk through how 100% financing works, because for many investors, solving the capital problem makes every other fear easier to manage.
Fear #1: “I don’t have enough capital”
What drives it
A traditional investment purchase can require a down payment, closing costs, a rehab budget, and reserves all at once. For many investors, a single deal would use up everything they have. As a result, they wait to save more, and the deal goes to someone else.
How to solve it
Change the structure, not just the savings goal. On qualifying deals, Catalyst Funding offers 100% loan-to-cost (LTC) financing, which covers the purchase price and the renovation budget. That removes the down payment or greatly reduces it, the single largest cash requirement in the deal. Also, while cash flows on buy and holds are lower in the higher rate environment, out of pocket at close is way down. During the lowest recent rate period, out of pocket was $45,000 on average for an entire calendar year. Now it is well under $20,000 with many deals being much lower or $0. We break down exactly how it works, and what you still pay, later in this article.
Fear #2: “Rates are too high. I should wait.”
What drives it
Investors remember the 3% to 4.5% mortgage rates of 2021 and compare every deal against them. Today, Freddie Mac’s 30-year fixed average sits at 6.65% (August 20, 2026), down slightly from 6.69% on August 6.
How to solve it
Focus on the spread, not the rate. Your profit comes from the gap between what you pay and what the property is worth after repairs. Financing cost matters, but deal quality matters more.
It also helps to understand why buying conditions look the way they do. Higher rates keep many retail buyers and large institutional investors on the sidelines. That reduced competition is a big reason motivated sellers are negotiating today. In our view, when rates fall, competition will likely return, and the discounts available now may shrink with it.
Practically, model your deals with today’s rates as the base case. If the numbers only work at a lower rate, the deal isn’t ready.
Fear #3: “The market is flat. What if I buy at the wrong time?”
What drives it
Headlines point to a slowdown, and some of that is real. Home prices are relatively flat in Houston and Dallas and down slightly in San Antonio and Austin. That said, the biggest money in any market is not made when prices are at their highest. It is when there is fear. Investors don’t make the most money in the stock market buying when prices are at an all-time high and going up exponentially and the same is true in real estate.
What the metro data shows
Statewide averages hide very different local markets. The figures below come from reports released in August 2026.
Metro | Latest data |
Houston | July single-family sales rose 1.6% year over year to 8,340, and volume is back to pre-pandemic levels. Nationally, sales remain 20.1% below 2019. About 40% of Houston households could afford a median-priced home in Q2, up from 36%. |
Dallas–Fort Worth | DFW passed Northern Virginia as the world’s largest data center market. Fort Worth–Arlington posted its second straight month of year-over-year price gains. |
Austin | Metro July sales topped 2,700, up 4.4%. The metro median rose 1% to $435,000, while the city median dipped 1.4% to $577,000. |
San Antonio | June sales climbed 15% to 3,479, and the median rose 4% to $329,730. Sellers received close to 94% of list price. |
How to solve it
Treat each metro, and each submarket, as its own market. Rising inventory and softer prices are exactly what give buyers negotiating power. Meanwhile, slower job growth is a reason to underwrite conservatively, not a reason to stop. Build in slightly lower resale prices, slightly lower rents, and longer hold times, then buy only the deals that still work.
Fear #4: “What if I overpay?”
What drives it
Overpaying usually starts with an inflated after-repair value (ARV). An investor picks the best sale in the neighborhood, assumes the finished house will beat it, and builds the whole deal on that number.
How to solve it
- Use a disciplined comp set. Start with four renovated sales and one as-is sale from the same neighborhood, ideally within the same boundaries and school district.
- Match the house. Keep comps within about 20% of the subject’s square footage, and match construction type where possible.
- Stay inside the range. If your deal only works when your property becomes the highest sale in the neighborhood, the deal is the problem.
- Run the numbers before you offer. The free Catalyst Deal Analyzer shows cash out of pocket, projected profit or cash flow, and equity capture in minutes.
Fear #5: “What if the rehab goes over budget or my contractor disappears?”
What drives it
Contractor problems are among the most common reasons a good deal turns into a bad one. Delays, change orders, and paying for work that never gets done can be real.
How to solve it
- Watch the deposit. A reasonable contractor deposit in Texas runs 20% to 25% of the contract. Requests of 35% or more are a financial-stability red flag.
- Put specifics in writing. List brands, models, finishes, and colors in the contract, not just “new appliances” or “update lighting.”
- Set a realistic timeline with rewards and penalties for turn time. A common benchmark is about $1,250 of renovation completed per day, so a $50,000 rehab should take roughly 40 days.
- Pay for verified progress only. Tie payments to milestones, and confirm the work in person before releasing money. Never pay just because the contractor says they need to pay their crews on Friday.
Catalyst’s draw process adds a second set of eyes. Renovation funds are released in draws after work is completed. Third-party licensed inspectors or our experienced internal operations team handle draw inspections. In addition, the borrower portal shows draw requests, approvals, and disbursements in real time, and we pay draws in five business days or less.
Fear #6: “What if I can’t sell or refinance?”
What drives it
Every hard money loan has to be repaid through a sale or a refinance. Investors worry about a house that sits on the market, or a refinance appraisal that comes in lower than expected.
How to solve it
Plan the exit before you buy, and have a backup. For flips, budget extra hold time and price the finished product to the comps. Also, work to ensure you have the best product on the market at a slightly lower price. On a rental, confirm rents with nearby leased properties and line up your long-term loan early.
Here, the lender you choose makes a measurable difference. Catalyst handles both the hard money loan and the conventional or DSCR take-out loan in-house, with one loan officer for both. Because refi or take-out work begins during the rehab, the move into long-term financing can happen in days instead of weeks. On certain deals, we can also refinance into DSCR before the property is leased. Our bridge appraisal program greatly helps reduce the risk of a lower second appraisal.
How 100% financing works, step by step
100% financing, technically 100% loan-to-cost, is a hard money structure that covers the purchase price and the renovation budget on a qualifying deal. Catalyst offers it on fix-and-flip and fix-to-rent projects across Houston, Dallas, Fort Worth, Austin, San Antonio, and Beaumont.
Step 1: Check the spread
The key test is your total cost compared with the ARV. At Catalyst, the loan typically cannot exceed 75% of ARV. Therefore, your purchase price plus your rehab budget needs to fit under that limit.
EXAMPLE After-repair value: $300,000 Maximum loan at 75% of ARV: $225,000 Purchase price: $170,000 Renovation budget: $50,000 Total cost: $220,000. That fits under the $225,000 limit, so this deal can qualify for 100% LTC. |
Now imagine the seller holds firm at $185,000. Total cost becomes $235,000, which is $10,000 over the limit. In that case, you either negotiate a lower price or bring the difference to closing. This is why 100% financing rewards investors who buy right. Even if you are not zero out of pocket, Catalyst 100% financing options greatly reduce out of pocket over competitors who require 10, 15 or 20% skin in the game.
Step 2: Plan for what you still pay
100% financing removes or reduces the down payment. However, it does not make a deal cost-free. You will still need:
- Contractor start-up funds. Like almost all hard money lenders, Catalyst does not advance rehab money up front. Instead, funds are released in draws after work is completed. On a $50,000 rehab, a 20% to 25% contractor deposit means about $10,000 to $12,500 to get started.
- Reserves for interest, taxes, insurance, and surprises during the project.
If those costs are still a hurdle, equity you already own may cover them. Catalyst’s HELOC program goes up to 90% combined loan-to-value on Texas non-owner investment properties, typically requires no appraisal, and can close in as little as 3 to 5 days. *Terms are current as of publication and subject to change.
Step 3: Get prequalified before you find the deal
Prequalification takes minutes and uses a soft credit pull, so it does not affect your credit score. Once you know your range, you can make offers with confidence and close on the seller’s timeline. Catalyst closes hard money loans, including 100% financing, in five days on average.
Why more deals may qualify right now
Qualifying for 100% LTC depends on buying at a real discount. With statewide inventory rising and prices softer, sellers have more reason to negotiate, and wider discounts mean more deals can fit under the 75% of ARV limit. For investors who stayed out of the market because of capital, now may be the time to look again. The smartest investors invest when others are afraid and are more cautious when everyone else is overpaying.
Is 100% financing a fit for you? A quick checklist
- You can buy the property at 75% of its after-repair value or very close to it.
- Cash or available equity covers closing costs, points, the contractor deposit, and reserves.
- A realistic scope of work is ready, and so is a contractor to start it.
- Your exit is clear, whether a resale or a refinance, and you have a solid backup plan.
If most of these apply, 100% financing is worth exploring. Otherwise, a conversation with a loan officer can show you which pieces to strengthen first.
Frequently asked questions
Is it a bad time to invest in Texas real estate?
No. Statewide prices have are not growing as rapidly and job growth has slowed (but the job market is still growing in Texas), which calls for more conservative underwriting. At the same time, Houston sales are back to pre-pandemic volume, Austin metro sales rose 4.4% in July, and San Antonio sales rose 15% in June. Softer conditions also give buyers more motivation to negotiate.
How does 100% financing work for a fix-and-flip?
The lender covers the purchase price and the renovation budget, as long as the total stays within the lender’s limit, typically 75% of ARV at Catalyst. Rehab funds are released in draws as work is completed.
What do I still pay with 100% loan-to-cost?
You still cover closing costs and origination points, but they can be rolled into the loan. The contractor’s starting deposit to kick off the job is the investors’ responsibility. A HELOC on property you already own can help cover those costs.
Should I wait for rates to drop before investing?
No. Waiting carries its own cost. Lower rates tend to bring more buyers back into the market, which can shrink today’s acquisition discounts. As a reminder, when rates were the lowest in recent memory, the average out of pocket for Catalyst borrowers was $45,000. Now it is well below half of that. A better approach is to underwrite at current rates and buy only deals that work at those rates.
Can a first-time investor get 100% financing?
Yes, on a qualifying deal. Lenders weigh the deal most heavily, so a first-time investor with a strong spread, a supported ARV, a realistic budget, and enough cash for closing and reserves can qualify.
Does 100% financing work for rentals?
Yes. Catalyst offers 100% LTC on qualifying fix-to-rent deals and handles the conventional or DSCR take-out loan in-house when the property is ready for long-term financing.
Catalyst Funding can provide the perfect financial solution for your investment needs.
Whether you’re investing in Houston, Dallas, San Antonio, Austin, or any other area in Texas, we’ve got you covered!
Turn hesitation into a plan with Catalyst Funding
Catalyst Funding has financed real estate investors in Houston, Dallas, San Antonio and Austin since 2014. Our team includes active investors who have faced these same fears on their own projects. The loan officers are also passionate about being trusted advisors. We offer hard money, 100% financing on qualifying deals, HELOCs, cash-out refinances, and conventional or DSCR loans, all in-house, with one dedicated loan officer from start to finish.
With nearly 1,000 reviews averaging 4.9 stars and a five-day average close, we focus on several things: amazing communication, being a trusted advisor, being highly responsive, and making sure your deal doesn’t fall apart.
If fear has kept you out of the market this year, challenge yourself to look at challenges as opportunities. The most successful investors don’t follow the trends, they are confident in setting them.
*All loan programs are subject to borrower qualification, property eligibility, and underwriting approval. Terms are current as of publication and subject to change.
Get Started with Catalyst Funding - Today!
Catalyst Funding offers a full range of capital solutions for Texas real estate investors – hard money, 100% financing, cash-out refinance, and HELOCs up to 90% on rentals. Let’s talk about what fits your specific situation.
- Apply Now!
- Try our free Deal Analyzer for your next deal in Texas.
- Serving: major Texas metros including Austin, Dallas, Houston, San Antonio and Beaumont.
- Learn about our 100% financing hard money loans for San Antonio flippers
- Explore our DSCR loans for rental properties
- Call us: 281-219-9701
- Connect with us on social media: Facebook | Instagram | X | LinkedIn | YouTube

